Tuesday, May 29, 2012

Eggplant Baked Egg rolls

So, One night for dinner, I made chicken fried rice and wanted something to partner it with.
So, rummaging through the freezer were a package of egg roll wrappers. Normally, I make egg rolls with a coleslaw mix (cabbage {green and purple} and carrots) and sometimes I throw in ground beef and/or turkey.
This day, I had none of these ingredients!
What I did have was an eggplant, a bunch of green onions and a bag of snack size carrots!
They were a hit!

For a dozen egg rolls :
1eggplant
1 1/2 cup shredded carrots
1 bunch of green onions (about 5 or 6 onions)
1 1/2 to 2 (you can add more, to taste) tablespoons of soy sauce
 1 to 11/2 teaspoon of garlic powder
12 egg roll wrappers
Pam or other cooking spray of your choice
Preheat oven to 350
1. Dice the eggplant and green onions
2. Shred the carrots
3. Saute the eggplant, carrots and onions
4. Add the soy sauce and garlic powder
6. Line a baking sheet with parchment paper and spray (generously with cooking spray)
5. Spoon about 2-3 tablespoons of the eggplant mixture onto an egg roll wrapper
6. Roll the wrapper (like a burrito)
7. Line up filled and rolled egg rolls onto baking sheet
8. Once all egg rolls are on baking sheet spray the egg rolls with cooking spray
9. Bake in oven for 7-8 minutes,  then flip egg rolls and bake for another 7-8 minutes until both sides are golden brown and egg rolls are crispy
10. Serve with your favorite sweet and sour sauce and enjoy!

Monday, May 21, 2012

My creative seven year old son blessed me with an awesome Mother's Day gift. A Mike Wazowski (from Monsters Inc.) "Trophy ".
I was just in awe of his creativeness!  On the back of the Monster 's Inc. card he wrote "Happy Mother's Day. You are a terrific MOMster"!

He used a rubber ball for the body. Benderoos for the limbs and microphone. Modeling clay for the ears. An empty tennis ball tube for the stool and slipped in construction paper with a "laugh collecting" canister, like in the movie!

Tuesday, May 15, 2012

DIY Jewelry Box

The kiddos and I made grandma a jewelry box from an old book.

I used an exacto  knife to cut out the pages leaving a quarter inch on all sides. It is not exact because you are cutting through so many pages, but it turns out just fine.



Once all the pages are cut through, I "painted " on mod podge on the outside pages, while I used a heavy object set on the book to press the pages together. I applied another layer after the first layer dried.







.










We glued buttons over the writing on the front and side cover.
If you want to create a "secret" stash box. The leave it looking like an ordinary book.
The kiddos filled the jewelry box with homemade jewelry.
Grandma loved it!





Thursday, May 10, 2012

Mother's Day Journal

My kiddos and I  had been thinking about what to give grandma for Mother's Day. What do you give to a grandma who has pretty much everything?
Then I saw this idea on Instagram http://abeautifulmess.typepad.com/my_weblog/2012/05/make-your-own-instagram-journal.htm from A Beautiful Mess.

I knew she would love a prayer journal and candid pictures of the kiddos. I used pictures uploaded from my cell, not all Instagram photos. I don't have Photoshop, but my husband recently downloaded Picasa 3 from Google for free and it works great. Picasa 3 has a collage template that I used.

 I used a composition notebook for the journal base. (I buy tons of them for pennies right before school begins every Fall). I printed out the collage in color on regular printer paper and glued (I used Mod Podge Glosss)  it to the front cover of the notebook. I folded in the edges and glued them down as well. Once the picture was secured to the front cover, I used the craft sponge on a stick to "paint" the Mod Podge Gloss on the actual picture. This gave the front cover a nice glossy look, like it had been there all along,





I love the way it turned out! We each wrote a special Mother's Day note along with a favorite verse. It is being sent off in the mail today!
Happy Mother's Day!



Wednesday, July 20, 2011

Leather Journal gift

For my husband's birthday he had asked for a journal to keep with his Bible. After pricing the nice journals, the kids and I decided to make him one.

 I wanted to get him a leather bound journal. I went to Goodwill and bought a leather coat for a whopping price of $4.98!  I took it home and we ripped the lining out of it.
 I laid it out as flat as possible on the cutting mat and went to town. The back was the largest piece.
 I eyeballed all the cutting and measuring. I took   8 1/2  X 14 paper and trimmed it a bit  to fit the leather part. I wanted to give the journal a "rugged" look.
I took a stack of paper (about 20 or so pieces) so there would be about 40 (or so) papers for journal entries.(80 if using front and back).
I wanted to make sure that the fold  of the leather cover was nice and straight with the fold of the paper. So, I folded the leather cover with the paper inside.
 I did not have an awl to make holes in the leather, nor did I have an extra strong paper punch. So, I used a Phillip's screw driver and a bit of elbow grease. I made 4 holes. Roughly about 2 inches from the top and bottom were the first two holes and then about 1/2 inch from the two, I made two more.
Once, the screwdriver made the hole and went all the way through the stack of paper, it made a nice white mark on the leather where I needed to make the holes in the cover.
Once the holes were made. I cut 2  long strips of leather about 15 inches long and  about a little less than 1/2 inch wide. The strips were used to bind/tie the journal paper to the leather cover.
I threaded each strip from the back of one hole , through all the paper to the middle and into the other hole to the back.
Then threaded both strips through the inside of the leather cover to the outside.

Then I just tied a knot and snipped the ends as long as I wanted.
I wanted to make a strap, so that it could be closed. So, I cut another strip about 15 -17 inches long and stitched it roughly to the back of the journal.
Then I cut another strip about 3 1/2 inches long and about 1 1/2 inch wide and stitched it along both sides to the front of the journal. I wanted to be able to thread the long pieced through, so that the journal would close nicely.
Here is the final product! It took about an hour and a half and a quick stop at Goodwill.

The kids and I wrote a happy birthday note on the first page, along with my husband's  favorite verse. 

Wednesday, July 13, 2011

Crayon making

When my daughter first started school, she was given the cutest heart crayon at her first Valentine's party.
So, this past year we gave it the good o' Jones try and they turned out pretty good.
 We gathered all our old broken crayons. Peeled off the wrapping, which in our opinion is the hardest part!
 So, we wanted to make our hear crayons multi-colored. So the first layer we wanted it to be red. So we melted crayons that were red or in the red color family.
 I designated an old pot to melt crayons in and made my own double boiler. Just stuck it in another old pot of boiling water. Once the water began boiling, I just turned the flame to low and kept it on the whole time. Once all the crayons were liquid I poured them into molds. You need to make sure all crayons have melted, and that there are no lumps.
 I bought these silicon molds at Target 2 for $2.50. I poured red melted crayon in each mold about 1/3 of the way.
 Then I melted another color for the second layer.  We decided to go with a purple'ish color. NOTE: you want to make sure your first layer is solidified before you pour in the second layer. It does not have to be all the way cooled, but it does need to be solid enough to not allow the second layer to mix through.

 Then melted orange and yellows for the last layer. Make sure you second layer is solid!

 Our final crayons! Make sure that the crayons are completely cooled before popping them out of the mold.
 Our second batch.
We used small jewelry bags (purchased at Michaels) to put them in, my kiddos made Happy Valentine's Day tags and we stapled them on the bags.
Note: make sure to ventilate the area you are melting the crayons in, it can get a bit smelly. ;)
Happy melting!

The MINI doughnut

So, we have been on this Starbucks kick lately. My husband got my kiddos hooked on the mini doughnuts. I think that they are so adorable. So, I came across a mini doughnut pan made by Wilton and had to buy it!
I figured baking doughnuts would be much healthier than frying them!
 My only problem, was the icing. I used the confectionery sugar icing recipe on the sugar box and it was a bit gooey. Next time I will definitely research a better icing, one that hardens a bit.
Other than the icing which was more my issue, they were a big hit with my Starbucks loving family!